Structural steel and sections
C+ and Z purlins
Plasterboard supports
Solar mounting systems
Square tubes
23 sizes from 16×16 to 250×250 · wall 1.5 to 12 mm
Twenty-three sizes, from 16 × 16 to 250 × 250. The square section takes bending in both axes, making it the profile for columns and secondary framing. Heavy walls, up to 12 mm, start at 150 × 150.
- GradesS235JRH standard · S275J0H on request
- Standard length6,000 mm
- FinishesUncoated; shot-blasted and primed from 3 mm
- Corners rounded at 1.6 to 2.4 times the thickness, per EN 10219-2
- Twenty-three sizes from 16×16 to 250×250 wall 1.5 to 12 mm
- Standard length 6 m other lengths on request
- Light framing, columns and structures
- Machine frames and welded fabrication
- Street furniture and sign supports
| Section | 1,5 mm | 2 mm | 2,5 mm | 3 mm | 3,5 mm | 4 mm | 5 mm | 6 mm | 8 mm | 10 mm | 12 mm |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 16 × 16 | · | · | · | — | — | — | — | — | — | — | — |
| 20 × 20 | · | · | · | — | — | — | — | — | — | — | — |
| 25 × 25 | · | · | · | — | — | — | — | — | — | — | |
| 30 × 30 | · | · | · | — | — | — | — | — | — | — | |
| 35 × 35 | · | · | · | — | — | — | — | — | — | — | |
| 40 × 40 | · | · | · | — | — | — | — | ||||
| 45 × 45 | · | · | · | — | — | — | — | — | — | — | |
| 50 × 50 | · | · | · | — | — | — | |||||
| 60 × 60 | · | · | · | — | — | — | |||||
| 70 × 70 | · | · | · | — | — | — | |||||
| 80 × 80 | · | · | · | — | — | — | |||||
| 90 × 90 | · | · | · | — | — | — | |||||
| 100 × 100 | · | · | · | — | — | — | |||||
| 120 × 120 | · | · | · | — | — | — | |||||
| 130 × 130 | · | · | · | — | — | — | |||||
| 140 × 140 | · | · | · | — | — | — | |||||
| 150 × 150 | · | · | · | — | — | — | |||||
| 160 × 160 | · | · | · | — | — | — | — | — | — | — | — |
| 180 × 180 | · | · | · | — | — | — | — | — | — | — | — |
| 200 × 200 | · | · | · | — | — | — | — | — | — | — | — |
| 220 × 220 | · | · | · | — | — | — | — | — | — | — | — |
| 230 × 230 | · | · | · | — | — | — | — | — | — | — | — |
| 250 × 250 | · | · | · | — | — | — | — | — | — | — | — |
Click a dot to add the section to your selection. Each section has its own thickness range: Ø21.3 stops at 2.5 mm, 150 × 100 starts at 3 mm.
Useful for this product
The table shows standard thicknesses. The forming line can make others: enter yours, from 1.5 to 12 mm.
Each section has its own thickness range: combinations missing from the table are not produced. Shot-blasting and primer only apply from 3 mm; below that, delivery is uncoated. Between a section's minimum and maximum, the thickness is free. Weight calculated from geometry at density 7.85: it ignores bend radii and overestimates by 1 to 2 percent. The sales offer uses the producer's table.